• 2.4" x 1.9" stripboard (or special PCB)
• 5pin DIN socket (PCB mounting)
• 14pin DIL socket (optional)
• 16pin DIL socket (optional)
• 6pin or 8pin DIL socket (optional)
• 7 x PCB pins (optional)
• box
• cable tie
• solder

• GameBoy link cable (6 wire!!)
• black wire (not needed if you made the special PCB)
• red wire (not needed if you made the special PCB)
• green wire (not needed if you made the special PCB)

• CNY17-1X (can also use CNY17-1, see note later)
• 1MHz oscillator (such as X331B)
• 74161

• 5K6 (use a 2K2 resistor if you are using a CNY17-1, see above)
• 100K
• 220R

• 2 x 100nF

> back to main page <

(c) Gareth Morris 2002
email - homepage